EMERY STONE MILL

The system’s base consists of two specially sanded stones that are separated. The lower stone is connected to the main shaft and is driven by a motor. The substrate stone is fixed. The product is spread between the two stones at the entrance, and the bran removal process is done by folding. Thus, the distance between the stones can be adjusted, allowing for the production of specialized products. With the capacity adjustment bolts at the entrance, the required hulling rates can be achieved. The motor belt connections and the rotating stone system are enclosed and very secure. There are two types of stone mills: -Vertical Stone Mill -Horizontal Stone Mill HORIZONTAL STONE MILL STANDARD MODELS: 600, 700, 800 MM Our horizontal stone mill models are available with artificial millstones in sizes of 600, 700, and 800 mm, and are used for milling various dry products such as grains, peas, coffee, spices, and others. The Akyürek millstone-supplied horizontal stone mills guarantee fine grinding and high efficiency. Millstones The millstone is the most crucial part of a mill. The quality of the millstone determines both the milling capacity of the mill and the quality of the product. The design of today’s Akyurek artificial millstones is the result of practical experience gained over more than 40 years of production. The stones are produced in sizes ranging from 250 mm to 1515 mm, using high-quality stone materials that are rarely found outside Turkey. While there are many imitations, there is only one original, identified by the Akyurek quality seal located on the back of the stone. This is your guarantee for an original millstone. Working Principle of the Horizontal Stone Mill The base of the system consists of two specially sanded stones that sit on top of each other. The lower stone is connected to the main shaft and is driven by the motor. The substrate stone is fixed. The product is spread between the two stones at the entrance, and the bran removal process is carried out through folding. Thus, the distance between the stones can be adjusted, allowing for the production of specialized products. With the capacity adjustment bolts at the entrance, the required hulling rates can be achieved. The motor belt connections and the rotating stone system are enclosed and designed to be secure.